UltraPulley "kit" From 9.8g
Tech info
Description
Lightest Pulley Wheels with the lowest friction and the highest stability.
Super low friction Hybrid-Ceramic stainless bearings with protective seals.
Lightweight and durable Delrin body with phased or non-phased teeth.
Phased teeth are available in PH (all chains but MTB AXS) and PHB (MTB AXS).
Check "TECH DETAILS" for fitting, tuning and assembling info.
Add ExtraBolt 12.2 for the lightest top notch assembly.
Installation notes:
Di2 12s requires 2 ExtraBolt 12.2C or equivalent M5x15.5mm bolts
AXS road requires 1 ExtraBolt 12.2C or equivalent M5x15.5mm bolt
AXS MTB/Gravel require ExtraBolt 12.2B + 12.2C or equivalent M5x14 + M5x15.5mm bolts
Installation Bolts
Nessuna immagine disponibile
Installation Bolts
All UltraPulley models are equipped with a twin-bearing system and their width at the bolt fitting is 8.4mm
Their fitting into derailleur cages proved to be fine on any common setup, only in few cases (listed below) are required longer bolts
Check your setup before ordering and eventually use Extralite bolts (or equivalent) to achieve a perfect installation
- Di2 12s requires 2 ExtraBolt 12.2C or equivalent M5x15.5mm bolts
- AXS road requires 1 ExtraBolt 12.2C or an equivalent M5x15.5mm bolt
- AXS mtb/gravel require ExtraBolt 12.2B + 12.2C or equivalent M5x14 + M5x15.5mm bolts
ExtraBolt 12.2 are specifically designed for derailleur pulleys and are available in 3 different lengths
ExtraBolt 12.1 are less specific but very versatile and can generally offer a good fitting too
Note: some Sram models employe a steel M4 bolt at the top pulley position, despite its smaller diameter it fits UltraPulley without issues
Tuning Tips
Nessuna immagine disponibile
Originally phased-pulleys were born to help guiding the chain on MTB single chainring systems but can fit road systems too
Pulleys with phased teeth (PH) can be applied also on double chainring systems with the benefit of a higher shifting precision
Most derailleur cages can fit pulleys with one or more teeth than the original
However each setup differs slightly so you always have to analyze it specifically
As example Dura Ace 11/12s have been positively tested also with 13-13T, 12-12PH and 12-14PH
If you plan to fit UltraPulley 12PH in the upper position note that it behaves differently and more precisely than, as example, a regular 12T
UltraPulley 13T is not phased however the wider diameter keeps the upper pulley a bit closer to cogs and that may add precision in some setups too
The possible improvements are part of your personal tuning process and taste, no written rules to project your ideal setup
Kits
Nessuna immagine disponibile
Complete Kits
|
Model |
Direct replacement for |
Upper position |
Lower position |
Weight (set) |
Manual |
|
UltraPulley 11-11 |
Sram Red / XO |
11T Not Phased * |
11T Not Phased * |
9.8g |
|
|
UltraPulley 12-12 |
Di2** and Shimano road 12/11/10s |
12T Not Phased * |
12T Not Phased * |
12.4g |
|
|
UltraPulley 13-13 |
Shimano MTB XRT-XT 12s |
13T Not Phased * |
13T Not Phased * |
14.6g |
|
|
UltraPulley 12-12 PH |
Sram XX1-XO1-XLPR-GX 11s |
12T Phased * |
12T Phased * |
12.2g |
|
|
UltraPulley 12-14 PH |
Sram XX1-XO1-GX Eagle 12s |
12T Phased |
14T Phased |
14.0g |
|
|
UltraPulley 14-16 PH |
Sram XX1-XO1-GX Eagle 12s |
14T Phased |
16T Phased |
16.2g |
|
|
UltraPulley 14-16 PHB |
Eagle XX SL-XX-XO AXS from 2023 |
14TB Phased AXS |
16TB Phased AXS |
16.2g |
Manual(*) Interchangeable for upper or lower position
Manuals
Spare Parts
Spare Parts
19,13 €